34
Terminal Installation
Turning On the Terminal
Once the terminal is installed and all back panel connections have been made,
power it up. It is powered-up and operating when the power supply is connected to
AC power; to toggle the display off or on, press and release the power
management button.
See the following figure for the location of the power management button.
Figure 4-6 3360SE Power Management Button
The logo will appear on the screen, followed by:
•
The Setup Wizard, if it is the first time that you have turned on your terminal.
•
The Winterm Connection Manager dialog box, if the Setup Wizard has been
completed.
If desired, adjust the display's geometry and intensities to your preferences.
Adjustments to the display can be made at any time, whether or not the terminal is
connected to a server. See "Changing Terminal Properties" for more information.
Note
If the button is continuously depressed for 3-5 seconds,
the unit will perform a hard boot.