Hardware Properties Sheet - Wyse Winterm 3200LE Administrator's Manual

178
External Devices

Hardware Properties Sheet

The Hardware properties sheet is displayed by default and is shown in
Figure 25-2. The following table discusses the properties sheet.
Table 25-2 Hardware Properties Sheet
Function
Information
Connection
Description
This group box displays information
about the touchscreen that is
connected to your terminal. To display
the information, click on Find
Touchscreen (see below).
Controller Type
This field shows the controller type.
Firmware Version
This field shows the firmware version.
Status
This field shows the status:
• OK
• Not Found
If there is no MicroTouch touch screen
connected to the terminal, the Status
field will display Not Found.
Use this group box to configure the
connection between the terminal and
the touchscreen.
Port
Select the Com port that the
touchscreen is connected to.
Baud Rate
Select the proper baud rate for the
connection.
Find Touchscreen
Click on this command button to detect
the touchscreen.