Warning And Error Messages - HITEC X2 ACPro Operation Manual

Warning and Error Messages

In the case of an error, the screen will communicate the cause of the error and
emit an audible sound.
BALANCE
40
An incorrect polarity is detected.
The battery has been interrupted.
The battery connection is incorrect.
The balance connect is incorrect.
The input voltage is less than 11V.
The input voltage is higher than 18V.
The Voltage of one cell in the battery pack is too low.
The voltage of one cell in the battery pack is too high.
The voltage of one cell in the battery pack is invalid.
The cell number is wrong.
The internal temperature of the unit is too high.
The external temperature of the battery is too high.
The battery capacity is more than the maximum capacity set
by the user.
The charging time is longer than the maximum charging
time set by the user.
The battery voltage is higher than the maximum voltage set
by the user when charging in balance mode.
Balance adapter not attached.