Power Distribution - HITEC X2 ACPro Operation Manual

Power Distribution

BATT/PROGRAM
A
SYSTEM SETTING->
LIPO BALANCE
B
5.1A
AC Max Power Set
A
AC Max Power Set
B
Powered by AC Household Current:
In AC mode, the X2 AC Pro has a maximum charging output of 200 watts total.
This charge output can be allocated differently to each channel utilizing the
Power Distribution feature. To adjust the wattage between channels, go to BATT/
PROGRAM menu and use the INC ▬ or DEC
SETTINGS, press ENTER/Start to enter the System settings menu and use the ▬
+
or buttons to scroll to the AC Max Power Set screen. Press ENTER/Start and
the wattage amount will begin to blink. Use the ▬ or
wattage for that channel.
ADJUSTING ONE CHANNEL WILL CHANGE THE OTHER CHANNEL
PROPORTIONALLY. FOR EXAMPLE, WHEN YOU CHANGE ONE CHANNEL
Note
TO 130 WATTS, THE OTHER CHANNEL WILL ONLY HAVE 70 WATTS
AVAILABLE FOR CHARGING.
Powered by Automotive Battery or DC Power Supply:
In DC mode, the X2 AC Pro has a maximum charging output of 300 watts total. This
is allocated at 200 watts for channel A and 100 watts for channel B, this cannot be
adjusted. It is extremely important that you use either a fully charged 13.8V car
battery or a high quality AC/DC power supply in the range of 11-20V DC output with
minimum power of 240W or higher to ensure a reliable performance.
22.2V(6S)
70W
30W
Safety Timer
A
ON
LIPO BALANCE
B
5.1A 22.2V(6S)
AC Max Power Set
A
LIPO BALANCE
B
5.1A 22.2V(6S)
+
buttons to get to the SYSTEM
+
buttons to adjust the
120Min
50W
13