HITEC X2 ACPro Operation Manual page 31

Pb Lead-Acid Battery Program [
Pb Discharge
1.5A 12.0V(6P)
and number of cells.
Press and hold the ► button and discharging will begin.
P-6 1.0A 13.56V
DCH 005:10 00964
current, battery voltage, charging time and charged capacity.
When charging is complete, the screen will read "FINISHED" and the charger will emit
a chiming sound.
Additional Pb Process Information:
During the Pb battery charging/discharging process, the X2 AC Pro can display a
variety of information. Using the
information:
Capacity Cut-Off
ON 5000mAh
Temp Cut-off
.
50
In Power Voltage
12.56V
*Requires optional temperature sensor. (Part#: 44159)
Press the ► button again and the voltage rate value will
begin flashing. Use the
Once charging has commenced, the charger will display
the following real-time information: battery type, charging
+
or ▬ buttons you can also view the following
Capacity cut-
off setting
Temperature
cut-off
C
Input voltage
cont.]
+
or ▬ buttons to set the voltage
Safety Time
ON 200min
Ext. Temp ----
.
Int. Temp 37 C
Safety timer
setting
External*/ internal
temperatures
31