Pb Lead-Acid Battery Program - HITEC X2 ACPro Operation Manual

NiCd/NiMH Battery Program [
NiMH 0.5A 9.6V
D > C 00086
discharging current, battery voltage, charging time and charged capacity. You will
also see "D>C" or "C>D". This will indicate which cycling order you have chosen.
Either "D" or "C" will be flashing. This flashing indicates which part of the cycle is
currently being executed.
Once the cycling process is complete, the screen will read "END: CYCLE" and the
charger will emit a chiming sound. The X2 AC Pro will display the charge/discharge
capacity for each cycle. Using the
for each cycle.
Additional NiCd/NiMH Process Information:
During the NiCd/NiMH battery charging/discharging process, the X2 AC Pro can
display a variety of information, using the
following information:
NiMH Sensitivity
D.Peak 4mV/CELL
Ext. Temp ----
.
Int. Temp 37
Safety Time
ON 200min
*Requires optional temperature sensor. (Part#: 44159)

Pb Lead-Acid Battery Program

Pb (Lead-Acid):
BATT/PROGRAM
Pb BATT
acid) battery is significantly different from NiCD/NiMH batteries. Pb batteries can
only deliver current lower in comparison to their capacity. The same restriction
applies to the charging process. Consequently, the optimum charge current
can only be 1/10 of the capacity. A Pb battery cannot be used for fast charging.
Please follow the instructions provided by the battery manufacturer.
The X2 AC Pro offers the following Pb charge modes: Charge and Discharge.
Once cycling has commenced, the charger will display the
following real-time information: battery type, charging/
+
and ▬ buttons, you can scroll through this data
Delta Peak
sensitivity setting
External*/ internal
temperatures
C
Safety timer
setting
This program is only suitable for charging Pb (lead-acid)
batteries with nominal voltages of 2 to 20V. A Pb (lead-
cont.]
+
or ▬ buttons you can also view the
In Power Voltage
12.56V
Temp Cut-off
50
Capacity Cut-Off
ON 5000mAh
Input Voltage
Temperature
.
cut-off
C
Capacity cut-
off setting
29