HITEC X2 ACPro Operation Manual page 35

Soldering Iron [
When the soldering station is in operation, the soldering tip
temperature is between 392°F-842°F (200 °C-450°C). Mishandling
Caution
may cause burns or start a fire. Do not use the soldering iron near
flammable items such as nitro gas, LiPo batteries, etc. For safety
reasons, DO NOT charge batteries and soldering items at the same time.
Replacing the Tip:
Turn the power to the unit off, unplug the soldering iron cord and allow the iron to
cool down.
Parameter Changes:
BATT/PROGRAM
A
SYSTE M S ETTING->
START
ENTE R
Temperatur e U ni t
A
C elsiu s
INC/DE C
Temperatur e U ni t
A
F ah renheit
Replacement Parts:
Pencil Tip: # 44247
Chisel Tip: # 44248
cont.]
Insert the new tip
Press ENTER button to enter SYSTEM SETTING.
Press INC or DEC button to enter temperature unit set.
Press ENTER button and the temperature unit will start to
blink, press INC or DEC to change the unit. Press ENTER
button again to confirm the selection.
Hold the tip and pull it out
35