HITEC X2 ACPro Operation Manual page 11

Features
[cont.]
times in a row automatically. This function is useful for ensuring a full battery charge.
Delta-Peak Sensitivity for NiMH/NiCd:
This automatic charge termination program is based on the principle of the
Delta-peak voltage detection. When the battery's voltage exceeds the threshold,
the process will be terminated automatically.
Cyclic Charging/Discharging (NiMH and NiCd only):
1 to 5 cycles of charge > discharge or discharge > charge sessions for optimal
battery performance and balancing.
Soldering Iron:
The X2 AC Pro has a built-in 60-watt soldering iron for the times when
something must be repaired at the track or field.
Automatic Charging Current Limit:
You can set the upper limit of the charging current when charging your NiMH
or NiCd battery. The 'AUTO' charging mode, however, is recommended when
charging NiMH batteries with low impedance and capacity.
LiPo Battery Meter:
The user can check the battery's total voltage, the highest voltage, the lowest
voltage and the voltage of each cell.
Battery Internal Resistance Meter:
The user can check the battery's total internal resistance and the internal
resistance of each cell.
Capacity Limit:
The charging capacity is always calculated as the charging current multiplied by
time. If the charging capacity exceeds the limit, the process will automatically
terminate according to the maximum value previously set.
Temperature Threshold*:
The battery's internal chemical reaction will cause the temperature of the
battery to rise. If the temperature limit is reached, the process will be terminated.
* This function is available by connecting an optional temperature probe which is available as
a separate purchase.
Processing Time Limit:
Protect your battery by setting a maximum time limit for charging and discharging.
11