HITEC X2 ACPro Operation Manual page 18

Lithium Battery Program
R:3SE R S:3SER
CANCEL(STOP)
R:3SE R S:3SER
CONFIRM(ENTER)
number of cells detected by the processor as "R" and the number of cells you set
as "S". If both numbers are identical, you may press and hold the ENTER/Start ►
button to confirm and begin charging. If these numbers do not match, press the
BATT/PROG Stop ■ button to return to the previous screen and carefully check
the number of cells of the battery pack before proceeding.
DURING CHARGING/DISCHARGING, THE BATTERY SHOULD BE PLACED
INSIDE A FIRE PROOF/RETARDANT BAG AND ON A FIRE PROOF SURFACE
Caution
AWAY FROM OTHER COMBUSTIBLE OBJECTS.
LP3s 2.7A 11.88V
CHG 005:39 00256
count, charging current, battery voltage, charging time and charged capacity.
4.07 4.06 4.11V
0.00 0.00 0.00V
individual cell. You can also view a variety of other information as detailed later
in this manual. Once the battery is fully charged, the screen will read "FINISHED"
and the charger will emit a chiming sound. Press the ■ button to return to the
setup screen. You may also press the ■ button at any time during the charging
process to stop charging.
Lithium Balance Charge Mode:
This function is for balancing the voltage of individual Lithium-polymer battery
cells while charging. In order to use the Balance Mode, the battery must have a
balance lead. Charging in this mode is different from the normal modes because
the built-in processor monitors the voltage of each individual cell and controls
the discharge of each individual cell in order to equalize the voltage. Use of
a balance adaptor with any battery that has a balance lead will improve the
performance and lifespan of your battery.
BEFORE YOU BEGIN CHARGING YOUR BATTERY, MAKE SURE YOU
HAVE READ AND UNDERSTAND ALL OF THE WARNINGS AND SAFETY
Warning
INFORMATION CONTAINED ON PAGES 02-07.
18
[LiP0/LiHV/LiFe/Lilon cont.]
You are now ready to begin charging. Press and hold the
ENTER/Start ►button until you see "BATTERY CHECK, "
followed by the "CONFIRM (ENTER) / CANCEL(STOP)"
screen. The "CONFIRM/CANCEL" screen displays the
Once charging has commenced, the charger will display
the following real-time information: battery type/cell
If you are using a balance adaptor during charging, you
+
may press the button to view the voltage of each