Warning And Error Messages - HITEC RDX1 MiNi Instruction Manual

Warning and Error Messages

In the case of an error, the screen will communicate the cause of the error and
emit an audible sound.
CONTROL FAIL
26
Reversed polarity is detected.
The battery connection has been
broken.
The battery connection is incorrect.
The balance connection is incorrect.
The Voltage of one cell in the battery pack is too low.
The voltage of one cell in the battery pack is too high.
The voltage of one cell in the battery pack is invalid.
The number of cells is wrong.
The internal temperature of the unit is too high.
The external temperature of the battery is too high.
The battery capacity is more than the maximum capacity set
by the user.
The charging time is longer than the maximum charging
time set by the user.
The battery is already fully charged.
Battery pack voltage is lower than 5 volts. The RDX1 Mini
cannot charge a pack with a voltage of less than 5v.