Power Distribution - HITEC X4 AC Pro Instruction Manual

Power Distribution

Powered by AC Household Current:
In AC mode, the X4 AC Pro has a maximum charging output of 200 watts total
power. This charge output can be allocated differently to each channel utilizing
the Power Distribution feature.
A
B
C
D
To adjust the wattage between channels, go to BATT/PROGRAM menu and use
the INC. – or DEC + buttons to get to the SYSTEM SETTINGS, press ENTER/Start
to enter the System settings menu and use the – or + buttons to scroll to the AC
Max Power Set screen. Press ENTER/Start and the wattage amount will begin to
blink. Use the – or + buttons to adjust the wattage for that channel. Adjusting
power on one channel will also adjust the power on the corresponding linked
channel . The X4 AC Pro links channels A with C and B with D. The adjustment
ranges for Channels A & B are 50 - 100 watts while the adjustment range for
channels C and D are 0 - 50 watts.
Powered by an Automotive Battery or DC Power Supply:
In DC mode, the X4 AC Pro has a maximum charging output of 300 watts total.
This is allocated at 100 watts per channel on channels A and B and 50 watts per
channel on channels C and D. These are fixed values and cannot be adjusted.
It is extremely important that you use either a fully charged 13.8V car battery
or a high quality AC/DC power supply in the range of 11-18V DC output with
minimum power of 350W or higher to ensure a reliable performance.
12
AC Max Power Set
65W
LIPO BALANCE
2.0A 7.4V(2S)
AC Max Power Set
35W
LIPO BALANCE
2.0A 7.4V(2S)
LIPO BALANCE
A
2.0A
AC Max Power Set
B
100W
LIPO BALANCE
C
2.0A
AC Max Power Set
D
7.4V(2S)
50W
100W
7.4V(2S)
50W