Frequently Asked Questions; Do I Have To Configure The U P0/Epci Card; Which Pci Slot Should I Use For The U P0/Epci Card; Is The U P0/Epci Card Compatible With Pci Spec 2.1 - Siemens Hicom 150 E User And Installation Manual

Frequently Asked Questions

Frequently Asked Questions
Do I have to configure the U
Which PCI slot should I use for the U
Is the U
P0/E
Which interrupt should I use for the U
120
Because the U
P0/E
ply need to install it in your PC and the system will automatically as-
sign this card the necessary interrupt and I/O address.
However, problems may arise in some computers that use the PCI
bus together with the ISA/EISA bus. In this case, you must use the
setup program in the computer's BIOS to assign separate interrupts
to the ISA/EISA slots and the PCI slots; otherwise, the computer
will not detect the card (see documentation on the setup program
for your computer).
You can install the U
PCI card compatible with PCI spec 2.1?
The U PCI card is compatible with PCI spec 2.1.
P0/E
Because the U
P0/E
select an interrupt. It is configured by the system. If this is not the
case, you must configure the interrupt manually. To configure the in-
terrupt manually, insert a jumper on the motherboard or set an in-
terrupt in the motherboard's BIOS. In either case, you can select any
interrupt that is not being used by another ISA/EISA plug-in card.
Keep in mind that the interrupt settings on your motherboard and in
the BIOS must agree.
PCI card?
P0/E
PCI card was developed for the PCI bus, you sim-
PCI card in any free, long PCI slot.
P0/E
PCI card is a PCI card, you usually do not have to
PCI card?
P0/E
PCI card?
P0/E