Siemens Hicom 150 E User And Installation Manual page 92

Attendant p for hicom 150 e office
Hide thumbs Also See for Hicom 150 E:
Table of Contents

Advertisement

Installing the Hardware
92
Installation Procedure
1.
Make sure that the product package contains all of the follow-
ing items:
One U
One handset cradle with line cord to U
One handset with line cord to handset cradle
One driver disk for U
Two installation disks for Hicom Attendant P
Hicom Attendant P User and Installation manual
2.
Disconnect the PC from the power supply network and open
the housing (also refer to operating instructions from PC man-
ufacturer).
3.
Select a free, long PCI slot and remove its cover from the hous-
ing back panel (also refer to operating instructions from PC
manufacturer).
4.
Before installing the card, create a ground connection by
touching the computer housing; this is necessary because the
card is highly sensitive to static electricity.
5.
Remove the U
the selected PCI slot and secure it in place (also refer to oper-
ating instructions from PC manufacturer).
6.
Connect the U
as described under PIN assignments (
7 .
Connect the handset and, if applicable, the headset to the
handset cradle and connect the handset cradle to the U
PCI card as described under PIN assignments (
8.
Close the PC and reconnect it to the power supply network.
The yellow LED on the U
mately one second.
PCI card
P0/E
P0/E
PCI card from its antistatic case; plug it into
P0/E
PCI card to the Hicom 150 E Office system
P0/E
P0/E
P0/E
PCI card
Æ
95).
PCI card must flash for approxi-
PCI card
Æ
P0/E
95).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents