Troubleshooting Using The Trace Button (System Administrator Only) - Siemens Hicom 150 E User And Installation Manual

Problem Correction
Troubleshooting Using the Trace Button (System
Administrator Only)
126
The trace button allows you to store special error codes for repro-
ducible errors in a text file that can then be passed on to a service
technician at Siemens AG (intended for system administrator only).
Configuring the Trace Button
z
In the Attendant P root directory, open the vf3.cfg file using
any text editor.
z
Insert the following line under <System>:
Trace=5
z
Save the file and restart the Attendant P . The Trace button now
appears in the toolbar.
Click the Trace button in the toolbar to open the error code window.
Delete any old error codes using the Clear button. Generate the re-
producible errors and save the file. The file is saved as trace.txt in
the Attendant P root directory. Make a backup copy and send the
file to the service technician for error analysis.