Startup - Siemens Hicom 150 E User And Installation Manual

Startup

You can configure your attendant console PC so that the Hicom At-
tendant P switching program starts up automatically when you
switch on the PC.
If the program has not been configured to start up automatically,
you must start it manually or set up Hicom Attendant P for
automatic start up.
Automatic startup
Switch on the attendant console PC. As soon as Windows 95/98
loads, Hicom Attendant P automatically starts up and the program
window with the attendant monitor opens.
Manual startup
When you install the program, it is added to the Programs section
of the Windows 95/98 Start menu.
Start up the Hicom Attendant P from the Start menu. The program
window with the attendant monitor opens.
Set up Hicom Attendant P for automatic start up
1. Click on the "Start" button on the task bar and select
"Settings" ,"Taskbar" , "Start Menu Programs" .
2. Press the "Advanced" radial button: the screen will display:
"Exploring C:\Windows\Start menu" .
3. Open the "Programs" directory and locate the Hicom Atten-
dant P directory.
4. Locate the "Attendant P .exe"; copy this file.
5. In the "Program" directory, click on the "Start up" directory;
right mouse click and paste shortcut.
6. Close "Exploring" .
7 . On the "TaskBar Properties" screen, click "Apply" , then "OK" .
8. Exit and re-start the PC.
Startup
13