Publickey Authentication Enabled Sftp Client Configuration Example - HP MSR Series Configuration Manual

[Router-luser-manage-client002] authorization-attribute user-role network-admin
work-directory flash:/
[Router-luser-manage-client002] quit
# Create an SSH user client002. Specify the authentication method as password and service
type as sftp for the user.
[Router] ssh user client002 service-type sftp authentication-type password
2. Establish a connection to the SFTP server:
The device supports different types of SFTP client software. This example uses an SFTP client
that runs PSFTP of PuTTY version 0.58.
NOTE:
PSFTP supports only password authentication.
To establish a connection to the SFTP server:
a. Run the psftp.exe to launch the client interface shown in
command:
open 192.168.1.45
b. Enter username client002 and password aabbcc as prompted to log in to the SFTP server.
Figure 128 SFTP client interface
Publickey authentication enabled SFTP client configuration
example
Network requirements
As shown in
the RSA public key algorithm.
Establish an SFTP connection between Router A and Router B, so you can log in to Router B to
manage and transfer files.
Figure 129, Router B acts as the SFTP server, and it uses publickey authentication and
424
Figure 128, and enter the following