Publickey Authentication Enabled Sftp Client Configuration Example - HP FlexFabric 5930 Series Security Configuration Manual

Figure 36 SFTP client interface
Publickey authentication enabled SFTP client configuration
example
Network requirements
As shown in
assigned the user role network-admin to execute file management and transfer operations. Switch B acts
as the SFTP server and uses publickey authentication and the RSA public key algorithm.
Figure 37 Network diagram
Configuration procedure
In the server configuration, the client's host public key is required. Use the client software to generate the
RSA key pairs on the client before configuring the SFTP server.
1. Configure the SFTP client:
# Assign an IP address to VLAN-interface 2.
<SwitchA> system-view
[SwitchA] interface vlan-interface 2
[SwitchA-Vlan-interface2] ip address 192.168.0.2 255.255.255.0
[SwitchA-Vlan-interface2] quit
# Generate the RSA key pairs.
[SwitchA] public-key local create rsa
Figure 37, you can log in to Switch B through the SFTP client that runs on Switch A and are
132