HP MSR Series Configuration Manual page 104

Hpe flexnetwork msr router series
Hide thumbs Also See for MSR Series:
Table of Contents

Advertisement

NOTE:
The access device converts VLAN names and VLAN group name into VLAN IDs before VLAN
assignment.
Unsupported VLAN types
Do not specify the following types of VLANs for VLAN authorization. The access device does not
assign these VLANs to 802.1X users.
VLANs that have not been created.
Dynamically-learnt VLANs.
Reserved VLANs.
Super VLANs.
Private VLANs.
VLAN selection and assignment
If the server assigns a group of VLANs, the access device selects and assigns a VLAN according to
the VLAN ID format.
authorization VLANs.
Table 5 VLAN selection and assignment for a group of authorization VLANs
Types of authorized
VLANs
VLANs by IDs
VLANs by names
VLAN group name
VLAN IDs with suffixes
NOTE:
Assign VLAN IDs with suffixes only to hybrid or trunk ports that perform port-based access control.
Table 6
describes how the access device handles VLANs (except for the VLANs specified with
suffixes) on an 802.1X-enabled port.
Table 5
describes the VLAN selection and assignment rules for a group of
VLAN selection and assignment rules
The device selects a VLAN to be the authorization VLAN of a user,
depending on whether the port has other online users:
If the port does not have other online users, the device selects the
VLAN with the lowest ID from the group of VLANs.
If the port has other online users, the device selects the VLAN by
using the following process:
a. The device selects the VLAN that has the fewest number of
online users.
b. If two VLANs have the same number of online 802.1X users, the
device selects the VLAN with the lower ID.
The device follows the rules in
1.
The device selects the leftmost VLAN ID without a suffix, or the
leftmost VLAN ID suffixed by u as an untagged VLAN, whichever is
more leftmost.
2.
The device assigns the untagged VLAN to the port as the PVID, and
it assigns the remaining as tagged VLANs. If no untagged VLAN is
assigned, the PVID of the port does not change. The port permits
traffic from these tagged and untagged VLANs to pass through.
For example, the authentication server sends the string 1u 2t 3 to the
access device for a user. The device assigns VLAN 1 as an untagged
VLAN and other VLANs as tagged VLANs. VLAN 1 becomes the PVID.
89
Table 6
to handle VLAN assignment.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents