HP MSR Series Configuration Manual page 560

1. uRPF checks address validity:
uRPF permits a packet with a multicast destination address.
For a packet with an all-zero source address, uRPF permits the packet if it has a broadcast
destination address. (A packet with source address 0.0.0.0 and destination address
255.255.255.255 might be a DHCP or BOOTP packet and cannot be discarded.) uRPF
proceeds to step 7 if the packet has a non-broadcast destination address.
uRPF proceeds to step 2 for other packets.
2. uRPF checks whether the source address matches a unicast route:
If yes, uRPF proceeds to step 3.
If no, uRPF proceeds to step 7. A non-unicast source address matches a non-unicast route.
3. uRPF checks whether the matching route is to the host itself:
If yes, the output interface of the matching route is an InLoop interface. uRPF checks
whether the receiving interface of the packet is an InLoop interface. If yes, it does not check
the packet. If no, it proceeds to step 7.
If no, uRPF proceeds to step 4.
4. uRPF checks whether the matching route is a default route:
If yes, uRPF checks whether the allow-default-route keyword is configured to allow using
the default route. If yes, it proceeds to step 5. If no, it proceeds to step 7.
If no, uRPF proceeds to step 5.
5. uRPF checks whether the receiving interface matches the output interface of the matching FIB
entry:
If yes, uRPF proceeds to step 6.
If no, uRPF checks whether the check mode is loose. If yes, it proceeds to step 6. If no, it
proceeds to step 7.
6. uRPF checks whether the link-check keyword is configured for link layer check:
If no, the packet passes the check.
If yes, uRPF uses the next-hop address of the FIB entry to look up the ARP table for a
matching entry. Then it checks whether the MAC address of the matching ARP entry is
identical with the source MAC address of the packet. If yes, the packet passes the check. If
no, uRPF proceeds to step 7.
7. uRPF checks whether the packet is permitted by the ACL:
If yes, the packet is forwarded (such a packet is displayed in the uRPF information as a
"suppressed drop").
If no, the packet is discarded.
545