Displaying And Maintaining Apr - HP MSR Series Configuration Manual

Step
3. Enable application statistics
on an interface.

Displaying and maintaining APR

Execute display commands in any view and reset commands in user view.
Task
Display information about application
protocols.
Display information about application
groups.
Display statistics for the specified
application protocols (centralized devices in
standalone mode).
Display statistics for the specified
application protocols (distributed devices in
standalone mode/centralized devices in IRF
mode).
Display statistics for the specified
application protocols (distributed devices in
IRF mode).
Display statistics for application protocols
on an interface in descending order based
on the specified criteria (centralized devices
in standalone mode).
Display statistics for application protocols
on an interface in descending order based
on the specified criteria (distributed devices
in standalone mode/centralized devices in
IRF mode).
Display statistics for application protocols
on an interface in descending order based
on the specified criteria (distributed devices
in IRF mode).
Display information about predefined port
mappings.
Display information about user-defined port
mappings.
Clear application statistics for an interface
or all interfaces.
Command
application statistics enable
[ inbound | outbound ]
Command
display application [ name application-name | pre-defined |
user-defined ]
display app-group [ name group-name | pre-defined |
user-defined ]
display application statistics [ direction { inbound |
outbound } | interface interface-type interface-number |
name application-name ] *
display application statistics [ direction { inbound |
outbound } | interface interface-type interface-number [ slot
slot-number ] | name application-name ] *
display application statistics [ direction { inbound |
outbound } | interface interface-type interface-number
[ chassis chassis-number slot slot-number ] | name
application-name ] *
display application statistics top number { bps | bytes |
packets | pps } interface interface-type interface-number
display application statistics top number { bps | bytes |
packets | pps } interface interface-type interface-number
[ slot slot-number ]
display application statistics top number { bps | bytes |
packets | pps } interface interface-type interface-number
[ chassis chassis-number slot slot-number ]
display port-mapping pre-defined
display port-mapping user-defined [ application
application-name | port port-number ]
reset application statistics [ interface interface-type
interface-number ]
454
Remarks
By default, this feature is disabled.
You can enable the application
statistics feature on both the
inbound and outbound directions
of the interface.