Object Policy Configuration Example; Network Requirements - HP MSR Series Configuration Manual

Task
Display acceleration information for
object policies (distributed devices in
standalone mode/centralized devices
in IRF mode).
Display acceleration information for
object policies (distributed devices in
IRF mode).
Display information about IPv4 object
policies.
Display information about IPv6 object
policies.
Display information about the object
policies applied to zone pairs.
Display statistics for object policies
applied to a zone pair.
Clear statistics for the object policies
applied to zone pairs.

Object policy configuration example

Network requirements

Configure object policies to achieve the following goals:
•
The president office can access the financial database server through HTTP at any time.
•
The financial office can access the financial database server through HTTP from 8:00 to 18:00
on weekdays.
•
The marketing office cannot access the financial database server through HTTP at any time.
Figure 144 Network diagram
President office
192.168.1.0/24
Command
display object-policy accelerate { summary { ip | ipv6 } |
verbose { ip object-policy-name | ipv6 object-policy-name } slot
slot-number }
display object-policy accelerate { summary { ip | ipv6 } |
verbose { ip object-policy-name | ipv6 object-policy-name }
chassis chassis-number slot slot-number }
display object-policy ip [ object-policy-name ]
display object-policy ipv6 [ object-policy-name ]
display object-policy zone-pair security [ source
source-zone-name destination destination-zone-name ]
display object-policy statistics zone-pair security source
source-zone-name destination destination-zone-name [ ip | ipv6 ]
reset object-policy statistics [ zone-pair security source
source-zone-name destination destination-zone-name ] [ ip |
ipv6 ]
Financial database server
192.168.0.100/24
GE2/0/1
GE2/0/2 GE2/0/4
Device A
GE2/0/3
Financial office
192.168.2.0/24
478
Marketing office
192.168.3.0/24