HP MSR Series Configuration Manual page 173

Figure 51 Network diagram
Configuration prerequisites
•
Configure IP addresses for the host, router, and servers as shown in
they can reach each other.
•
Configure the RADIUS server correctly to provide authentication and accounting functions.
Configuring the portal authentication server on IMC PLAT 5.0
This example assumes that the portal server runs on IMC PLAT 5.0(E0101) and IMC UAM
5.0(E0101).
1. Configure the portal authentication server:
a. Log in to IMC and click the Service tab.
b. Select User Access Manager > Portal Service Management > Server from the
navigation tree to enter the portal server configuration page, as shown in
c. Configure the portal server parameters as needed.
This example uses the default settings.
d. Click OK.
Figure 52 Portal server configuration
158
Figure 51 and make sure
Figure 52.