HP MSR Series Configuration Manual page 484

[Router-acl-ipv4-basic-2001] quit
[Router] acl basic 2002
[Router-acl-ipv4-basic-2002] rule permit source 192.168.0.100 0
[Router-acl-ipv4-basic-2002] quit
[Router] connection-limit policy 1
[Router-connection-limit-policy-1] limit 1 acl 2001 per-destination amount 10 5
[Router-connection-limit-policy-1] limit 2 acl 2002 per-destination amount 100 10
As a result, the host at 192.168.0.100 can only initiate a maximum of 10 connections to the external
network.
Analysis
Both limit rules 1 and 2 contain IP address 192.168.0.100. Limit rule 1 is first matched and takes
effect to limit the connections from 192.168.0.100.
Solution
To resolve the problem:
1. Rearrange the two connection limit rules by exchanging their rule IDs.
2. If the problem persists, contact Hewlett Packard Enterprise Support.
469