Verifying The Configuration - HP MSR Series Configuration Manual

Hpe flexnetwork msr router series

Hide thumbs Also See for MSR Series:

Table of Contents

[Router] interface gigabitethernet 2/0/1

[Router-GigabitEthernet2/0/1] ip address 192.168.1.40 255.255.255.0

[Router-GigabitEthernet2/0/1] quit

# Set the authentication mode to AAA for the user lines.

[Router] line vty 0 15

[Router-line-vty0-15] authentication-mode scheme

[Router-line-vty0-15] quit

# Create a local device management user client001.

[Router] local-user client001 class manage

# Set the password to aabbcc in plain text for the local user client001.

[Router-luser-manage-client001] password simple aabbcc

# Authorize the local user client001 to use the SSH service.

[Router-luser-manage-client001] service-type ssh

# Assign the user role network-admin to the local user client001.

[Router-luser-manage-client001] authorization-attribute user-role network-admin

[Router-luser-manage-client001] quit

# Configure an SSH user client001. Specify the service type as NETCONF and the authentication

method as password for the user.

[Router] ssh user client001 service-type netconf authentication-type password

Verifying the configuration

# Verify that you can perform NETCONF operations after logging in to the router. (Details not shown.)

Show Quick Links

Table of Contents