3.
Install the screws to secure the hard drive to the hard-drive carrier.
Figure 21. Removing and installing a hard-drive adapter into a 3.5 inch hard-drive carrier
1.
3.5 inch hard-drive carrier
3.
hard-drive adapter
Removing a hard drive from a hard drive carrier
Prerequisites
1.
Keep the #2 Phillips screwdriver ready.
2.
Remove the hard drive carrier from the system.
Steps
1.
Remove the screws from the slide rails on the hard drive carrier.
2.
Lift the hard drive out of the hard drive carrier.
68
2.
screw (5)
4.
2.5 inch hard drive