Installing The Cooling Shroud; Intrusion Switch; Removing The Intrusion Switch - Dell PowerEdge R530xd Owner's Manual

Related Tasks
Removing the (optional) dual riser module
Removing an expansion card from the dual riser module
Installing an expansion card into the dual riser module
Installing the (optional) dual riser module

Installing the cooling shroud

Installing the cooling shroud
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE: For proper seating of the cooling shroud in the chassis, ensure that the cables inside the
system are routed along the chassis wall and secured using the cable securing bracket.
1. Ensure that you read the
2. Follow the procedure listed in
Steps
1. Align the tabs on the cooling shroud with the securing holes at the back of the chassis.
2. Lower the cooling shroud into the chassis until it is firmly seated.
Next steps
1. Install the optional PCIe expansion card riser.
2. If disconnected, reconnect thecables to the expansion card(s).
3. If required, open the expansion-card latch on the cooling shroud to support the full length
expansion card.
4. Follow the procedure listed in
Related Tasks
Installing an expansion card into the dual riser module
Installing the (optional) dual riser module

Intrusion switch

Removing the intrusion switch

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
50
Safety instructions.
Before working inside your
After working inside your
system.
system.