Installing An Ac Power Supply Unit - Dell PowerEdge R530xd Owner's Manual

2. Follow the procedure listed in
Steps
1. Disconnect the power cable from the power source and from the power supply unit that you intend
to remove and remove the cables from the strap.
2. Press the release latch and slide the power supply unit out of the chassis.
Figure 43. Removing and installing an AC power supply unit
1. release latch
3. power supply unit
5. power supply unit handle
Next steps
1. Install the AC power supply unit.
2. Follow the procedure listed in
Related Tasks

Installing an AC power supply unit

Installing an AC power supply unit
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
Steps
1. Verify that the power supply unit being installed is of the same type and has the same maximum
output power as the existing power supply unit.
112
Before working inside your
After working inside your
system.
2. power supply unit cable connector
4. connector
system.