Table of Contents
Advertisement
Menu Item
System Time
System Date
Asset Tag
Keyboard NumLock
F1/F2 Prompt on Error
Load Legacy Video Option
ROM
About Boot Manager
Boot Manager enables you to add, delete, and arrange boot options. You can also access System Setup
and boot options without restarting the system.
Entering Boot Manager
The Boot Manager screen enables you to select boot options and diagnostic utilities.
1.
Turn on, or restart your system.
2.
Press F11 when you see the message F11 = Boot Manager.
If your operating system begins to load before you press F11, allow the system to finish booting, and
then restart your system and try again.
Boot Manager main menu
Menu Item
Continue Normal Boot
One Shot Boot Menu
Launch System Setup
36
Description
Enables you to set the time on the system.
Enables you to set the date on the system.
Displays the asset tag and enables you to modify it for security and
tracking purposes.
Enables you to set whether the system boots with the NumLock enabled
or disabled. By default the Keyboard NumLock is set to On.
NOTE: This option does not apply to 84-key keyboards.
Enables or disables the F1/F2 prompt on error. By default, F1/F2 Prompt
on Error is set to Enabled. The F1/F2 prompt also includes keyboard
errors.
Enables you to determine whether the system BIOS loads the legacy
video (INT 10H) option ROM from the video controller. Selecting Enabled
in the operating system does not support UEFI video output standards.
This field is only for UEFI boot mode. You cannot set this to Enabled if
UEFI Secure Boot mode is enabled.
Description
The system attempts to boot to devices starting
with the first item in the boot order. If the boot
attempt fails, the system continues with the next
item in the boot order until the boot is successful
or no more boot options are found.
Takes you to the boot menu, where you can select
a one time boot device to boot from.
Enables you to access System Setup.
Advertisement
Table of Contents
Troubleshooting
