CAUTION: To prevent damage to the processor pins when replacing a faulty system
board, ensure that you cover the processor socket with the processor protective cap.
j.
memory modules and memory module blanks
4.
Keep the #2 Phillips screwdriver ready.
Steps
1.
Disconnect the SAS cable from the system board.
2.
Disconnect all other data and power cables from the system board.
CAUTION: Take care not to damage the system identification button while removing the
system board from the chassis.
CAUTION: Do not lift the system board by holding a memory module, processor, or other
components.
3.
Remove the screws securing the system board to the chassis.
Figure 54. Screw location on the system board
1.
system board screw (9)
4.
Hold the system-board holder, lift the system board and slide it toward the front of the chassis.
132
2.
system board holder