Table of Contents
Advertisement
Figure 16. Removing and installing a memory module
1.
memory module
3.
memory module socket ejector (2)
Next steps
1.
If you are removing the memory module permanently, install a memory module blank.
2.
If removed, install the PCIe expansion-card riser.
3.
If disconnected, reconnect the cables to the expansion card(s).
4.
Reinstall the cooling shroud.
5.
If closed, open the expansion card latch on the cooling shroud to support the full length expansion
card.
6.
Follow the procedure listed in
Related Tasks
Removing the (optional) dual riser module
Removing an expansion card from the dual riser module
Removing the cooling shroud
Installing memory modules
Installing an expansion card into the dual riser module
Installing the (optional) dual riser module
Installing the cooling shroud
After working inside your
2.
memory module socket
system.
59
Advertisement
Table of Contents
Troubleshooting
