Removing A Hard Drive From A Hard Drive Carrier - Dell DR4300 System Owner's Manual

Figure 69. Installing a hot-swappable hard drive or SSD
a. release button
b. hard drive or SSD carrier
c. hard drive or SSD carrier handle
Related tasks
Removing a 3.5-inch hard drive blank

Removing a hard drive from a hard drive carrier

Prerequisites
1. Keep the Phillips #1 screwdriver ready.
2. Remove the hot swappable hard drive carrier from the system.
Steps
1. Remove the screws from the slide rails on the hard drive carrier.
2. Lift the hard drive out of the hard drive carrier.
Figure 70. Removing a hard drive into a hard drive carrier
a. screw (4)
b. hard drive
c. hard drive carrier
Installing and removing system components 127