Figure 69. Installing a hot-swappable hard drive or SSD
a. release button
b. hard drive or SSD carrier
c. hard drive or SSD carrier handle
Related tasks
Removing a 3.5-inch hard drive blank
Removing a hard drive from a hard drive carrier
Prerequisites
1. Keep the Phillips #1 screwdriver ready.
2. Remove the hot swappable hard drive carrier from the system.
Steps
1. Remove the screws from the slide rails on the hard drive carrier.
2. Lift the hard drive out of the hard drive carrier.
Figure 70. Removing a hard drive into a hard drive carrier
a. screw (4)
b. hard drive
c. hard drive carrier
128
Installing and removing system components