Table of Contents
Advertisement
6. System Setup and Operation
How to Realize LED Display Connection
(10) Turn the knob, choose <X>, and set X as 360 (Note: X=VERTICAL CARD×WIDTH,
before we set vertical card as 3 and width as 120). Shown as follows:
(11) Same as above, set X of Port D of No.2 sending card as 360. Then connect the Port
D and Port U of Two Sending Cards to LED display is finished.
Rendering is as follows:
VSP 9516S
>
X
Y
SAVE TO SENDER CARD
User Manual
360
0
108
Advertisement
Table of Contents
