Table of Contents
Advertisement
6. System Setup and Operation
How to Realize the Text Overlay Setting
How to Realize the Text Overlay Setting
Before setting the text overlay, please make sure the input channel of the
text. For example, set VGA input as the text channel. Then make sure the
channel that the text will overlay, for example, overlay the text on CV1
channel. The operations are as follows:
1. Push VGA button to make sure there is VGA input.
2. Push CV1 button to make sure there is CV1 input.
3. Push the [MENU/EFFECT] button, turn the knob, choose <OUTPUT>,
push the knob to confirm, turn the knob, and choose <TEXT
OVERLAY>, push the knob to confirm.
Then enter into <TEXT OVERLAY> menu items, turn the knob, and
choose <TEXT OVERLAY>, push the knob to confirm, turn the knob
again, and choose ―ON‖ to enable the text overlay function.
4. Make sure VGA input is IMAGE B, and CV1 input is IMAGE A, if not,
choose <SWAP WINDOW> option in <PIP>, and choose ―ON‖ for
<SWAP WINDOW>.
5. Choose the VGA image in ―IMAGE B‖ in <SELECT> in <PIP> menu,
VSP 9516S
>TEXT OVERLAY
DISPLAY MODE
GAMMA
*TEXT OVERLAY
PRESET
BLEND MODE
BLEND LEVEL
PIP
LAYOUT
SELECT
->SWAP WINDOW
关
User Manual
>>
>>
ON
USER MODE
MODE1
0
ON
PIP L+T
IMAGE A
ON
95
Advertisement
Table of Contents
