Table of Contents
Advertisement
6. System Setup and Operation
How to Realize the Text Overlay Setting
and push [SCALE/CROP] button to adjust the size and position of VGA
image, then set the VGA image to the required position.
The standard position and size is: ensure the VGA image overlay on the
CV1 image, display normally and without black edges. If there are black
edges around VGA image, choose <ZOOM> option in <PICTURE> to
adjust.
6. Set the text overlay mode: choose <PRESET> option in <TEXT
OVERLAY>, push the knob to enter into the <PRESET> menu items.
Turn the knob to choose the preset mode, for example, set the VGA text
as WhOnBk, choose WhOnBk1 or WhOnBk2 (Note: Text Overlay only
support monochrome subtitles), user can also adjust the <BLEND
MODE> or <BLEND LEVEL> to get a better effect.
7. Push the [SAVE/PIP1] button to save the above parameters.
VSP 9516S
->H SIZE
V SIZE
H POS
V POS
->RESET
TEXT OVERLAY
->PRESET
BLEND MODE
BLEND LEVEL
User Manual
1920
1080
0
0
ON
WhOnBk2
MODE1
0
96
Advertisement
Table of Contents
