Table of Contents
Advertisement
4. Menu Orientation
MENU
CHOOSE CABLE: User can choose PORT D or PORT U.
HORIZONTAL CARD.
VERTICAL CARD.
WIDTH.
HEIGHT.
D PORT Offset (A/B) X.
D PORT Offset (A/B) Y.
DISPLAY CONNECTION: There are 8 kinds of connection mode currently.
SEND TO RECEIVER: Save the above settings to receiver.
SENIOR: Including the following settings:
CHOOSE CABLE: Show PORT D or PORT U.
RECEIVING CARD: Show the receiving card number.
X: Show the X value.
Y: Show the Y value.
SEND TO RECEIVER: Send to receiver after setting.
SENDING CARD VERSION: Show the sending card version.
RECEIVING CARD VERSION: N/A.
SAVE SETUP
SAVE TO: VSP 9516S provides ten save modes, users can save the
current operation to SAVE1 to SAVE10.
Note
The [SAVE/PIP1] button can also fulfill this
setting.
LOAD FROM: It can call the saved user modes via the call save function.
DELAY CALL: Set delay the output time. When more than one equipment
power on, and the processor is the end equipment in order to improve
question that can't identify the input signal and phenomenon that LED
screen appear messy code and flash screen, now need to delay the input
VSP 9516S
User Manual
51
Advertisement
Table of Contents
