Table of Contents
Advertisement
5. Communication Software Guideline
How to Connect Windows Control Program by LAN Interface
How to Connect Windows Control Program by LAN
Interface
First, install the upper computer software in the computer.
Connect VSP 9516S and computer with cable, the connection diagram is
as follows:
Power on VSP 9516S, start the network function, specific steps are as
follows: MENU--SYSTEM -- ETHERNET -- NETWOEK if it is consistent
with the computer, such as 192.168.0.***, take 192.168.0.100 for example.
Open the upper computer software, click
follows:
VSP 9516S
, interface is shown as
User Manual
76
Advertisement
Table of Contents
