Dataview ® Software; Installing Dataview - AEMC 6550 User Manual

For complete information on using the Megohmmeter with DataView, refer to the Help Menu within the
Megohmmeter Control Panel in DataView.

6.1 Installing DataView

DataView is a registered trademark of Chauvin Arnoux
®
DO NOT CONNECT THE INSTRUMENT TO THE PC BEFORE INSTALLING THE SOFTWARE AND
DRIVERS.
USB Flash Drive Install
1. Insert the USB drive into an available USB port (wait for driver to be installed).
2. If Autorun is enabled then an AutoPlay window should appear as shown.
NOTE: If Autorun is disabled, it will be necessary to open Windows Explorer, then locate and open the
USB removable disk drive labeled "DataView" to view the files on the drive.
3. In the AutoPlay window, select "Open folder to view files".
4. Double-click on Setup.exe from the opened folder view to launch the DataView setup program.
If installing onto a Vista based computer the User Account Control dialog box will be displayed. Select
the Allow option to proceed.
2. A Set-up window, similar to the following, will appear.
Megohmmeter Models 6550/6555
Shop for AEMC products online at:
6. DATAVIEW
®
d.b.a. AEMC
® ®
ShopAEMC
www.
SOFTWARE
Instruments.
.ca 1.877.766.5412
49