Resetting The Default Parameters - AEMC 6550 User Manual

3.4.3 Resetting the Default Parameters

To return to the initial configuration, choose Set Default Parameter.
The instrument requests confirmation.
If you choose OK, the following default parameters will be reset:
■ Audible level of the buzzer: 1
■ Auto Power OFF: will be set to OFF
■
Data rate: 38,400 baud
■
Programmed measurement duration: 2 minutes
■
Sampling duration: 10 seconds
■
DAR: 30/60 and PI: 1/10
■
Test type: Burning
■
Maximum output current: 5mA
■ Maximum output voltage: 10kV (6550), 15kV (6555)
■ Adjustable test voltages: 50V, 800V and 7000V
■
Ramp and step test voltages return to their original values, as do all alarm thresholds
■
The backlight will be turned off
22
Shop for AEMC products online at:
SET-UP
! WARNING !
All parameters
will be reset !
O.K.
CANCEL
ShopAEMC
www.
Megohmmeter Models 6550/6555
.ca 1.877.766.5412