Replacing The Fuse; Cleaning - AEMC 6550 User Manual

8.3 Replacing the Fuse

If the GUARD FUSE message appears on the display unit, the guard terminal fuse must be replaced.
The fuse can be replaced only by competent, accredited personnel.

8.4 Cleaning

Disconnect the instrument from any source of electricity.
■
Use a soft cloth, lightly dampened with soapy water
■
Wipe with a damp cloth and then dry with a dry cloth
■
Do not splash water directly on the clamp
■
Do not use alcohol, solvents or hydrocarbons
64
Shop for AEMC products online at:
ShopAEMC
www.
Megohmmeter Models 6550/6555
.ca 1.877.766.5412