During The Insulation Measurement - AEMC 6550 User Manual

4.4.8 During the Insulation Measurement

Press the START/STOP button to start the measurement.
The instrument generates high voltage. To indicate that the measurement is in progress, the instrument emits
an audible beep every ten seconds (if the buzzer is switched on) and the START/STOP button lights up red.
If the test voltage generated is >5000V, the START/STOP button blinks.
After a few seconds, the measurement is displayed in digital form and in analog form on a bargraph.
If the measurement is unstable, it is possible to apply a digital filter by pressing the FILTER button.
It is possible to view the available result values by pressing the DISPLAY button.
34
Shop for AEMC products online at:
START/STOP
995 MΩ
528 V
Elapsed Time 00:00:23
kΩ
1
10 100
528 V
DAR (30s/60s)
PI (1.0m/10m)
Capacitance
DISPLAY
ShopAEMC
www.
START/STOP
E-BRK
Set: 500 V 531 nA
MΩ TΩ
GΩ
1 1
10 100
100 10 10
995 MΩ
Set: 500 V
Elapsed Time 00:01:12
.ca
E-BRK
531 nA
1.00
---
---
Megohmmeter Models 6550/6555
1.877.766.5412