7.
SETUP
7.1.
STATUS
The Status tab shows the general status of the 9780SLKE2-H264HD.
7.1.1. Monitoring
Status: This field shows the name of the active profiles, or sets of configuration parameters, of the two
encoders and the expected resolution of the incoming video signal.
Note that the box does not auto-detect the input video standard and, therefore, the user should indicate
the appropriate input standard in the Encoding-Video tab. If there is a mismatch between the selected
input standard and the incoming standard, the following message is displayed. The same message is
reported if there is no input to the box.
9780SLKE2-H264HD Dual HD/SD-SDI StreamLINK™ MPEG2/H.264/AVC Encoder
Figure 7-1: 9780SLKE2-H264HD Status Tab View
Figure 7-2: Status Message
Revision 1.1
9780SLKE2-H264HD
Page 11