Encoder - Data; Figure 7-8: 9780Slke2-H264Hd Encoding - Data Tab View - evertz 9780slke2-h264hd User Manual

9780SLKE2-H264HD
9780SLKE2-H264HD Dual HD/SD-SDI StreamLINK™ MPEG2/H.264/AVC Encoder
•
Data Rate: The available data rates are 56, 64, 80, 96, 128 kbps.
•
Left Channel: User can select any channel from a list of 16 channels.
•
Center Channel: User can select any channel from a list of 16 channels.
•
Right Channel: User can select any channel from a list of 16 channels.
•
Left-surround Channel: User can select any channel from a list of 16 channels.
•
Right-surround Channel: User can select any channel from a list of 16 channels.
•
LFE Channel: User can select any channel from a list of 16 channels.
•
ISO_639_descriptor:
ISO_639_descriptor control and type the name of the language.
7.5. ENCODER – DATA
Figure 7-8: 9780SLKE2-H264HD Encoding – Data Tab View
The Encoding-Data tab allows access to the following ancillary data:
•
Closed Caption: Placing a checkmark in the Closed Caption box enables closed captioning.
•
WSS: Placing a checkmark in the WSS box enables widescreen signalling. The user can
indicate the line where the WSS signal is placed.
•
DVB Subtitles: Placing a check mark in the DVB Subtitles box enables the handling of DVB
subtitles (OP-47). The user can specify the PID associated with the stream which carries DVB
subtitles.
•
SD Closed Caption Line Field 1: This field identifies the line number in field 1 of the incoming
SD signal, where closed caption data is present.
•
SD Closed Caption Line Field 2: This field identifies the line number in field 2 of the incoming
SD signal, where closed caption data is present.
Page 18
To enable ISO_639_descriptor
Revision 1.1
check the checkbox near