Compact Telecontrol System Sicam Mic - Siemens SICAM MIC System Description

1.1

Compact Telecontrol System SICAM MIC

Compact performance
SICAM MIC (Terminal Module for microcontrol) is a low-cost, modular, telecontrol substation
and belongs to the proven SICAM RTU automation family.
The devices consist of a master control element and various I/O modules. The master control
element serves for interfacing and supplying the I/O modules and provides a telecommunica-
tions interface in accordance with IEC 60870-5-101 for dial-up or multipoint traffic.
Alternatively, LAN/WAN communication can be used according to IEC 60870-5-104 over
Ethernet TCP/IP. All modules are designed for DIN rail mounting.
Practical engineering
Great importance was placed on keeping the engineering process as simple as possible.
That's why the master control element has an integrated Web server for configuration, diag-
nostics and testing, so no special tools or additional licenses are needed. The tool is already
integrated in SICAM MIC and is operated with a standard Web browser.
Alternatively, it is also possible to use SICAM TOOLBOX II, the integrated engineering tool for
the entire SICAM RTU family.
Universal assembly
The modules are simply snapped onto a 35-mm DIN rail. Up to eight I/O modules can be
mounted in addition to the power supply module and the master control. The extension cable
CM-6810 enables the I/O modules to be distributed between two DIN rails. The advantage of
this is that even with limited space there is still adequate room for the modules.
12
SICAM RTUs, SICAM MIC System Description
MC6-054-2.00, Edition 07.2014
Introduction