Display Lighting - Miele KWT 1601 Vi Operating And Installation Instructions

Storing wine bottles

Display lighting

You can set the display lighting in the
middle zone so that the bottles are
illuminated even when the door is
closed.
Switching on the display lighting
^ Touch the access sensor so that it is
highlighted in yellow.
^ Touch the sensor for the display
lighting so that it is highlighted in
yellow.
The display lighting is now switched on
in the middle zone, even when the door
is closed. When the door is opened, all
three zones are lit up.
Switching off the display lighting
^ Touch the sensor for the display
lighting so that it is highlighted in
white.
The display lighting is now switched off
when the door is closed. When the door
is opened, all three zones are lit up.
28
Duration of the display lighting
The lighting duration for the display
lighting is set at 30 minutes at the
factory.
^ To change the lighting duration,
touch the sensor for the display
lighting for 2 seconds.
The set time (in minutes) appears in the
control panel.
The lighting duration can now be set in
15-minute steps using the two sensors
either side of the time display.
You can set a lighting duration of 15,
30, 45, 60, 75 or 90 minutes.
^ To confirm, touch the access sensor
so that it is highlighted in white.
If the door is closed before the new
setting is confirmed, the old setting
will be retained.