Switching The Appliance On And Off; Before First Use; Operating The Wine Conditioning Unit; Switching The Wine Conditioning Unit On - Miele KWT 6312 UGS Operating And Installation Instructions

Switching the appliance on and off

Before first use

Packaging material
 Remove all packaging material from
the inside of the appliance.
Protective foil
Stainless steel surfaces have a layer of
protective foil to prevent scratching dur-
ing transportation.
 Do not remove the foil until the wine
conditioning unit has been installed in
its final location. Start at one of the
top corners.
Cleaning
Please refer to the relevant instruc-
tions in "Cleaning and care".
 Clean the inside of the appliance and
the accessories.
20
Operating the wine condition-
ing unit
A light touch of the finger on the sen-
sors is all that is required to operate this
wine conditioning unit.
A tone will sound each time a sensor is
touched. You can deactivate this if you
wish (see "Selecting additional settings
- Acoustic signals").
Switching the wine conditioning unit
on
When the wine conditioning unit is con-
nected to the power supply, the power
connection symbol  will appear in the
display after a short while.
 Touch the On/Off sensor.
The power connection symbol  will
go out and the wine conditioning unit
will start to cool.
The first time the appliance is turned
on, the alarm symbol  will flash until
the selected temperature has been
reached.
The interior lighting comes on when the
door is opened.