Table of Contents
Advertisement
CRASH PAD
REMOVAL AND INSTALLATION
ESHA1200
REMOVAL OUTDOORS
1.
Separate the battery cable from the negative (-)
battery terminal.
2.
Remove the windshield wiper arm and blade.
ESHA040A
3.
Remove the weather strip and the cowl top cover.
ESHA040B
4.
Remove the cowl top outer front panel by installing
the windshield wiper linkage.
ESHA040C
5.
Remove the cover.
BODY (INTERIOR & EXTERIOR)
ESHA040D
6.
Remove the bolts holding the cowl cross bar.
ESHA040E
REMOVAL INDOORS
1.
Disconnect the wire connectors from the front seats
and then remove them.
CAUTION
Take care not to scratch the trim when removing the
front seats.
ESHA040F
Advertisement
Table of Contents
Troubleshooting
