Key Registration; Id Code Registration Sequence; Master Key Correction - Hyundai trajet Shop Manual

IMMOBILIZER CONTROL SYSTEM BE -79
KEY REGISTRATION
1. ID Code registration sequence
Unregistered
t
Using 10 key, turn ignition "ON" then 1I0FF".
10 Key is now registered in the ICM.
I
1
Within 10 seconds
per each key
Using master key 1, turn ignition 1I0N II then "OFF II ,
I
Master key 1 is now registered on the ICM.
I '
Repeat for master key 2.
1
Registration sequence complete.
L -_ _
~
J .
ETHA345A
2. Master key correction
If a new set of master keys needs to be produced,
it can be done by two methods:
a. Using 10 key
Registration complete status of ICM
t
Using 10 key, turn ignition 1I0NII then 1I0FF.
10 Key is now registered in the leM
1
Remove 10 key
I
1
Within 10 seconds
Insert new master key 1 and turn ignition "ONII then
per each key
1I0FF'. New master key 1 is registered on the ICM.
I
Repeat for master key 2.
! '
1
Sequence complete
ETHA345B
b. Using password