Hyundai trajet Shop Manual page 95

BE -50
2. Paint thinner.
3. Masking taps.
4. Silicone remover.
5. Thin brush.
Wipe the glass adjacent to the broken heater line,
clean with silicone remover and attach the masking
tape as shown. Shake the conductive paint con-
tainer well, and apply three coats with a brush at in-
tervals of about 15 minutes apart. Remove the tape
and allow sufficient time for drying before applying
power. For a better finish, scrape away excess de-
posits with a knife after completely dried. (allow 24
hours).
CAUTION
After repairing, clean the glass with a soft dry cloth
or wipe along the grid line with a slightly moistened
cloth.
BODY ELECTRICAL SYSTEM
I
Masking tape
ETA9165G