Table of Contents
Advertisement
AUDIO SYSTEM
BE -21
REMOVAL AND INSTALLATION
ETHA0900
1.
Disconnect negative (-) battery terminal.
2.
Remove the center facia panel and disconnect air
temperature switch connector.
ESHA040Q
3.
Loosen the screws holding the audio and remove
the audio assembly from the mounting bracket.
4.
Installation is the reverse of the removal process.
SERVICE INSTRUCTIONS
ETHA0750
TAPE HEAD AND CAPSTAN CLEANING
1.
To obtain optimum performance, clean the head,
and capstan as often as necessary, depending
on frequency of use and tape clean the head
and capstan as often as necessary, depending on
frequency of use and tape cleanness.
2.
To clean the tape head and capstan, use a cotton
swab dipped in ordinary rubbing alcohol. Wipe the
head and capstan.
ETA9035A
Advertisement
Table of Contents
Troubleshooting
